Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
Res 2022-01-1094 Purchase of Wastewater Treatment Equipment
CITY OF ANNA, TEXAS RESOLUTION NO. 4061aw' Ok 104 A RESOLUTION OF THE CITY OF ANNA, TEXAS AUTHORIZING THE CITY MANAGER TO EXECUTE PURCHASE ORDERS FOR THE PURCHASE OF WASTEWATER TREATMENT EQUIPMENT IN THE AMOUNT NOT TO EXCEED TWO HUNDRED TWENTY-EIGHT THOUSAND NINE HUNDRED SEVENTY-TWO DOLLARS AND FIFTY CENTS ($228,972.50); AND PROVIDING FOR AN EFFECTIVE DATE. WHEREAS, treatment process equipment is essential to the operation and maintenance of professional, safe, and high quality public wastewater treatment facilities; and, WHEREAS, the FY 2022 City of Anna Annual Budget included the purchase of new equipment for the rehabilitation of the John R Geren Wastewater Treatment Plant; and, WHEREAS, the approved equipment includes a new bar screen and belt press; and, WHEREAS, the City of Anna is seeking to purchase the equipment and have it installed based on the quotes attached hereto in Exhibits A, B, and C; and, NOW THEREFORE, BE IT RESOLVED BY THE CITY COUNCIL OF THE CITY OF ANNA, TEXAS THAT: Section 1. Recitals Incorporated The recitals above are incorporated herein as if set forth in full for all purposes. Section 2. Authorization of Payment and Funding. That the City Council of the City of Anna hereby authorizes the City Manager to execute purchase orders in an amount not to exceed $228,972.50, including: a. Duperon Adaptive Technology —Bar Screen: $149,750.00 b. Howard Construction —Installation of Bar Screen: $25,800.00 c. Langley Separation and Process —Belt Press: $33,422.50 d. Contingency in the amount of $20,000 in case of unforeseen electrical work and market fluctuations due to supply chain issues. That funding for the equipment and installation shall come from existing fund balance in the City of Anna Utility Fund. PASSED AND APPROVED by the City Council of the City of Anna, Texas on thisk- day of January 25, 20220 ATTEST: City Secretary, Carrie Land APPROVED: vA 0 a K/ yor, Nate Pike ^�'fPtf�ftlitlt115��t Exhibit A Dla t,QUe�sl''on ADAPTIVE TECHNOLOGYTM Date: March 15, 2021 Project: City of Anna, TX Owner: Troy Hopkins City of Anna, TX Proposal # 10148 RS Duperon Contact: Local Representation: Brandon Dayton —Safes Project Manager John D. Belton bdayton@duperon.com Vision Equipment 2720 Fallcreek Dr, Carrollton, TX 76006 Mark Hickok— Regional Sales Manager (972) 922-3126 mhickok@duperon.com john@visionequipment.net (989)412-0289 To: Troy Hopkins Duperon is pleased to offer the following scope of supply including mechanical bar screen and accessories, as listed in the scope of supply. Please also refer to Duperon Terms and Conditions attached. We appreciate the opportunity to provide the following pricing for the screening requirements at the City of Anna project. We look forward to the opportunity to work with you and thank you for your consideration. Duperon Corporation � 1200 Leon Scott Court � Saginaw, MI 48601 � P 989.754.8800 � F 989.754.2175 � TF 800.383.8479 www.duperon.com FIRM PRICE Proposal Number P10148 R5 Scope of Supply: City of Anna, TX (1) Mechanically Cleaned Bar Screen- Link Driven, Front Cleaning, Front Retum • FlexRakeOModel o LF, LowFlow—Outdoorinstallation • Continuous Cleaning, top to bottom, the entire width of scraper • Continuous Cleaning without an operator • Scrapers of UV Stabilized UHMW-PE • Self-lubricating, long -wearing UHMW-PE components • UV Stable UHMW-PE self-lubricating, long -wearing SmartLinks • SSTL304 side fabrications, dead plate and cross members • SSTL304 full enclosure covering from deck to discharge. • SSTL316 bar screen material • SSTL304 2 inch close outs to channel wall, both sides of the rake • SSTL304 debris shield to deflect debris into washer compactor hopper • SSTL304 4 inch curb adapter • 27.25 in bar screen length • Head Sprocket Only Design — no critical components under water • Fully enclosed with front and rear easily removable panels • 1.00 It of head differential structural design 30 degrees from vertical • Bar opening:.25 inch • 0.50 MGD Average flow • 1.00 MGD Peak flow • 22 inch maximum water level • 1,60 ft inlet channel width • 4.60 it inlet channel heigh • Gravity of pumped flow • 715 Ibs approximate weight Estimated Anchor Bolts Needed Mechanical Baz Screen: Estimated Anchor Bolts Needed far FlexRake (not Included In scope of supply —by othersJContractor): Anchor Bdts — per FlexRake Bolts for anchor toes and plates 0 (4) 12 mm (1!2 inch) diameter x 115 mm (4-1/2 inch) long Embed HAS Rods w/ Hilti RE-500-V3 Adhesive System Above quantities not guaranteed as accurate, final quantities will be outlined in submittals. (1) Duperon'a Washer Compactor- Dual Auger System • Model WC3.A2.5 0 3/4HP Mator and gearbox 0 3.29 ft from operating deck to top of washer compactor hopper rim o 4.66 ft long hopper length 0 1.45 it wide hopper width o SSTL304 o SSTL304 Custom hopper per dimensions above • Reduced Maintenance o Accepts variable debris up to four inches, including rocks, clothing, concrete, metal, grease and septage — eliminatingjams and equipment shutdown 0 Positive displacement technology assures that all debris which enters the hopper is washed, compacted, and discharged for disposal Duperon Corporation 11200 Leon Scott Court l Saginaw, MI 486011 P 989.764.8800 l F 989.764.2176 l TF 800.383.8479 www.duperon.com FIRM PRICE City of Anna TX Proposal Number P10148 R5 1 53 o Durable dual auger design eliminates debris wrapping o Non -clogging flood wash port located prior to compaction housing — ideal for non - potable water • Reduced Odor o Up to 60% dry solids and up to 60% mass/weight reduction — significantly reducing fecal content and odor • Reduced Landfill Costs o Up to 84% volume reduction o Self -Regulating Compaction Housing —allows for consistent dry solids output regardless of fluctuations in debris volume • Reduced Power Consumption o % HP inverter duty motor consumes just 576 watts o Requires .4 KWH Discharge chute design • 10.00 it long discharge chute with, (1) bend, (1) chute support Water supply and drain criteria • Non -Clog Flood Washing • Utilizes filtered effluent or municipal water • Consumes 3 to 10 gallons per minute at 40 to 60 PSI • 3.00 inch NPT male drain connection • 0.50 inch NPT water supply connection Estimated Anchor Bolts Needed forWasherCompactor: Estimated Anchor Bolts Needed (not included in scope of supply —by Others/Contractor): • Anchor Bolts Bolts for anchor toes and plates o (4) 12 mm (1/2 inch) diameter x 115 mm (4-1/2 inch) long Embed HAS Rods w/ Hilti RE-500-V3 Adhesive System • Above quantities not guaranteed as accurate, final quantities will be outlined in submittals. (1) Controls Package, Main Panel • NOTE: Referencing NFPA 820, the main control panel shall be removed from the equlpmenUchannel by a minlmum of 10 Peet. • Main fusible disconnect for incoming power460V/60hz/3ph • Wall mount NEMA 4X SSTL304 enclosure • Enclosure to be: o Located outdoors in an unclassified area o Located where temperatures drop below 0°C (32'F) frequently o Located where temperatures exceed 40°C (105°F) frequently • Enclosure to include equipment o (1) LowFlow FlexRake with 1/4HP motor driven by AC Tech VFD with panel mounted keypad o (1) Washer Compactor with 3/4HP motor driven by AC Tech VFD with panel mounted keypad • Relay Based logic, to include o Pilot lights, push buttons and selector switches on front door o Terminal blocks, ETM's, breakers, and relays where required o Hand -Off -Auto selector switch uses PB station in Hand mode o Hard contact SCADA Interlock(s) Run, No Fault, Auto, Remote start o Adjustable on/off cycle timers o Machine runs when remote start contact is made or run timer is active, it doesn't speed up unless a float is selected o Line reactor o Load Reactor Duperon Corporation 11200 Leon Scott Court I Saginaw, M148601 I P 989.754.8800 I F 989.764.2175 I TF 800.383.6479 www.duperon.com FIRM PRICE City of Anna, TX Proposal Number P10148 R5 11 53 o HydroRanger 200HM1 • Weather protection devices inside enclosure o Heater, thermostat, panel air conditioner Instrumentation • Dual Float Level Control o (2) Mechanical Float Switch including 50 it long cabling. Local to equipment mounted devices • (2) Three Button NEMA 41719 Enclosure for E-Stop, Jog -Reverse and Forward Bar Screen Spare Parts • (10) Snap Rings • (4) Link Cievis Pins (4) Hex Head Cap Screw (4) Scraper Nut (1) Snap Ring Tool • (1) 1 oz. Never Seez tube Washer Compactor Spare Parts • (2) UpperlLower Support: Alger • (2) Side Support: Auger • (24) FHCS: 0.25.20x1 • (24) 0.25 Flat Washer SAE • (24) 0.25 Nylock Nut • (1) 1 oz. Never Seez (1) 14 oz grease tube On Site Technical Assistance • (1) Trip(s) • (1) Technician (2) 8 hour man -days) total onsite • If additional Technical Service days are required, please add per the rates included in the Clarifications section of this scope of supply. Operation and Maintenance Manuals • 6 Hard Copies Warranty One Year Standard material and workmanship Freight to Jobsite Included Price: $149,750.00 Price is valid for 60 days from bid date. Dellvery: • Submittals: 4-6 weeks after approved purchase order, based on workload Equipment Delivery: 8-12 weeks after approval based on workload FOB Jobsite, Freight Paid Exceptions: • As noted Duperon Corporation 11200 Leon Scott Court I Saginaw, MI 48601 I P 9e9.764.6e00 I F 989.764.2176 I TF 800.3e3.13479 www.duperon.com FIRM PRICE Proposal Number P10148 R5 ClaziFications: City of Anna, TX General Clarifications Prices are valid for 60 days unless stated otherwise in the proposal See Duperon Contractor Installation Guides for guidance in estimating these costs. • Duperon requires 3 week's advanced notice in writing to schedule field service technician on site. Field Services will be provided as outlined in this proposal. Duperon field service rate is $750 per day plus travel and per diem expenses. If field service personnel arrive on site as scheduled and the project is not ready for intended services to be performed, Duperon will invoice for additional days, if required. If the time required is greater than the time listed in this proposal, Duperon will invoice at the above rates. Bar Screen Clarifications • The bar screen will be shipped fully assembled • The LowFlow screen was not designed to manage septage. • A standard minimum downstream water depth of 1.00 it is required for Flexrake to prevent galling of the moving SSTL parts. Modifications such as a sloped sump or downstream underflow weir may be necessary and is to be provided by others. • It is recommended on sites with solid piatetgrating across channels; that channel ventilation connection points occur upstream of mechanical screening equipment as necessary to relieve the channel fumes from exhausting only through the equipment enclosure • Freeze protection • Field assembly of SSTL screen enclosure and side shields required. • Some minor field welding will be required at the top of the channel support bar and at the operating deck anchor points. • Crane may be required for unloading. • Spreader bar may be required for unloading • Scope of supply and pricing above does not include additional structure for seismic, additional head differential or wind conditions. Washer Compactor Clarifications • Some minor field assembly required • Water supply and discharge piping by others • Mounting hardware by others Controls Clarifications Notlncluded: • All conduit and field wiring between the equipment by others • Mounting hardware by others • Anything not specifically stated in this Proposal. • Bonding, tariffs, permits, taxes, liquidated damages. • Construction and /or installation work of any kind at the Jobsitel • On -site conditions affecting the work described or which affects the installation. • Conduit, stands, control mounting wiring, junction boxes, or other accessories. • Any site work or installation tasks (ie, unloading, placement, dewatering, diving, clearing the forebay, wiring, provision of concrete structure, etc.), equipment (such as cranes, hammer drills, etc.), or anchor bolts. • Pre -installation tasks such as touch-up painting, checking bolts for tightness, removal of shipping containment devices, etc. • Engineering: Does not include drawings other than those for the FlexRake. • Additional structure for seismic or wind conditions. Dupe ran Corporation 11200 Leon Scott Court I Saginaw, MI 486011 P 989.764.8800 I F 989.764.2175 I TF 900.383.8479 www.duperon.com /i si on �N quipment TEXAS •NEW MEXICO • OKLAHOMA Vision Equipment and Consulting STANDARD TERMS AND CONDITIONS OF SALE 1. TERMS APPLICABLE The Terns and Conditions of Sale listed below are the exclusive terms and conditions applicable to quotations made and orders accepted by Vision Equipment and Consulting ("Seller') for the sales of products, equipment and parts relating thereto (`Products"). This quotation or acknowledgment and acceptance Is expressly made conditional upon Buyers assent to such terms and conditions. Any of Buyers terms and conditions which are In addition to or different from those contained herein, which are not separately agreed to by Seller In writing, are hereby objected to and shall be of no effect. Objections to any terms and conditions contained herein shell be deemed waived If Seller does not receive written notice thereof within 20 days of the date of this acknowledgment. Buyer in any event will be deemed to have assented to the terms and conditions contained herein if Buyer either makes any payment to Seller or accepts any delivery of the Product. The term 'this Agreement" as used herein means this quotation or acknowledgment together with any attachment hereto, any documents expressly incorporated by reference and these Standard Terms and Conditions of Sale. 2. DELIVERY (a)Delivery dates are good faith estimates and do not mean that lime is of the essence'. Buyer's failure to promptly make advance or Interim payments, supply technical Information, drawings and approvals will result In a commensurate delay In delivery. Unless otherwise agreed In writing by Seller, title and risk of loss or damage to the Products shall pass to Buyer upon delivery o the Products F.O.B., Sellers plant (F.O.B., pant of manufacture for any Product shipped direct to Buyer from any location other than Sellers plant). (b)Seller shall not be liable for any loss or delay due to acts of governmental authority, laws or regulations, strikes, fires, floods, earthquakes, severe weather, epidemics, quarantine restrictions, war, riot, acts of Buyer, wrecks, delays In transportation, inabllity to obtain necessary labor or materials from usual sources, or other causes beyond the reasonable control of Seller. In the event of any such delay in performance due to such causes, the date of delivery or performance shall be deferred for a period equal to the time lost by the reason of the delay. 3. WARRANTY (a)Seller warrants to Buyer that the Products will be delivered free from defects in material and workmanship. This warranty shall commence upon delivery of the Products and shall expire on the earlier to occur of 12 months from Initial operation of the Products and 18 months from delivery thereof (the 'Warranty Period'). If during the Warranty Period Buyer discovers a defect in material or workmanship and gives Seller written notice (hereof within 10 days of such discovery, Seller will, at Its option, either deliver to Buyer a replacement part or repair the defect In place. Seller will have no warranty obligations under this paragraph 3(a): (I) if Buyer fails to ensure that the Products are operated and maintained In accordance with generally approved industry practice and with Seller's specific written Instructions; (II) If the Products are used in connection with any mixture or substance or operating condition other than that for which they were designed; (lii) If Buyer falls to give Seller such written 10 day notice; (iv) If the Products are repaired by someone other than Seller or have been intentionally or accidentally damaged, or (v) corrosion, erosion, ordinary wear and tear or In respect of any parts which by their nature are exposed to severe wear and tear or are considered expendable. (b)Seller further warrants to Buyer that at delivery, the Products will be free of any liens or encumbrances. If there are any such liens or encumbrances, Seller will cause them to be discharged promptly after notification from Buyer of their existence. (c)THE EXPRESS WARRANTIES SELLER MAKES IN THIS PARAGRAPH 3 ARE THE ONLY WARRANTIES IT WILL MAKE. THERE ARE NO OTHER WARRANTIES, WHETHER STATUTORY ORAL, EXPRESS OR IMPLIED. IN PARTICULAR, THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. (d)The remedies provided in paragraphs 3(a) and 3(b) are Buyer's exclusive remedy for breach of warranty. 4. LIMITATION OF LIABILITY The remedies of buyer set forth herein are exclusive and the aggregate liability of seller for all claims of any kind for any loss or damage resulting from, arising out of or connected with this agreement or from the performance or breach thereof, or from the manufacture, sale, delivery, resale, repair or use of any product, shall in no event exceed the price allocable to the product which gave rise to the claims. The foregoing notwithstanding, if applicable, any claims for (a) delay shall not exceed 10% and (b) breach of performance guarantees shall not exceed 20% of the price. In no event shall seller be liable to buyer or any party for special, Incidental or consequential damages of any nature, including, but not limited to, loss of profits or revenue or business opportunity, loss by reason of shutdown of facilities or Inability to operate any facility at full capacity, or cost of obtaining replacement power. The limitations and exclusions of liability set forth in this paragraph shall apply to any claim, whether based on contract, warranty, tort (Including negligence), fault, strict liability, Indemnity, or otherwise. All liability of Seller to Buyer, arising out of this Agreement, shall terminate at the expiration of 3 years after final acceptance. The provisions of this paragraph 4 shall supersede any Inconsistent provisions in any Instrument forming part of this agreement. 5. TAXES Sellers prices do not Include any sales, use, excise or other taxes. In addition to the price specified herein, the amount of any present or future sales, use, excise or other tax applicable to the sale or use of the Products shall be billed to and paid by Buyer unless Buyer provides to Seller a tax -exemption certificate acceptable to the relevant taxing authorities. 6. SECURITY INTEREST Seller shall retain a purchase money security interest in the Products until all payments have been made In full. Buyer agrees to do all acts necessary to perfect and maintain such security Interest In Seller and to protect Sellers Interest In the Products. David Bartlett Hershel Ezzell, P.E. Randall Eulenfeld John Belton son aenNo wnwAoe corps crosa mesas C: 2103814030 Q2BB778508414 G�366131922aG C:6724M312a dav1d@MslongJpmentmet fmm1*l@NsionegJpmertnet rarda1@+bbnequpmeftnet Iotn@y1s1onegJpmentnet Jodie Marbut Ron Shindoll Mike Neill Kelsha Antoine, PhD, PE Weatherford Gadend Amarillo Houston C: e17�20-0411 0: 2148678065 C:OOe6768976 06323663963 Jadk@Itslon•qulpmertnet ron@�hlonequipmentnet M11e@vislorxgJpmentnel Kelsha@iislonequpmerinet www.visionequipment.net V1S1011 � Equipment TEXAS • NEW MEXICO • OKLAHOMA 7. SET OFF Neither Buyer nor any of Its affiliates shall have any right to set off claims against Seller or any of Its affiliates for amounts owed under this Agreement or otherwise. 8. PATENTS Unless the Products or any part thereof are designed to Buyer's specifications and prodded the Product or any part thereof is not used in any manner other than as specified or approved by Seller in writing, (I) Seller shall defend against any suit or proceeding brought against Buyer to the extent based on a claim that any Product, or any part thereof, infringes any United Slates patents; provided Seller is nclRed promptly in writing and given authority, information and assistance for the defense of such suit or proceeding; (II) Seller shall satisfy any judgment for damages entered against Buyer in such suit; and (III) if such judgment enjoins Buyer from using any Product or a part thereof, then Seller shall at Its option: (a) obtain for Buyer the right to continue using such Product or part; (b) eliminate the Infringement by replacing or modifying all or part of the Products; or (c) take back such Product or part and refund to Buyer all payments on the purchase price which Seller has received, in which case neither Buyer nor Seller will have any claim against the other under this Agreement or arising out of the subject matter of this Agreement. The foregoing slates Seller's entire liability for patent Infringement by any Product or part thereof. 9. CANCELLATION Buyer may only cancel Its order for cause agreeable to the Seller and upon written notice to Seller and upon payment to Seller of Seller's cancellation charges, which shall be specified to Buyer and shall take Into account among other things expenses (direct and Indirect) Incurred and commitments already made by Seller and an appropriate profit. In the event of the bankruptcy or insolvency of Buyer or in the event of any bankruptcy or insolvency proceeding brought by or against Buyer. 10.CHANGES Seller will not make changes in the Products unless Buyer and Seller have executed a written Change Order for such change. Such Change Order will Include an appropriate price adjustment. If the change Impairs Seller's ability to satisfy any of its obligations to Buyer, the Change Order will Include appropriate modifications to this Agreement. If after the date of this quotation or acknowledgment, new or revised governmental requirements should require a change in the Products; the change will be subject to this paragraph 10, 11,CONFIDENTIALITY Buyer acknowledges that the Information which Seller submits to Buyer In connection with this quotation or acknowledgment Includes Seller's confidential and proprietary Information, both of a technical and commercial nature. Buyer agrees not to disclose such Information to third parties without Seller's prior written consent. Buyer further agrees not to permit any third party to fabricate the Products or any parts thereof from Seller's drawings. Buyer will defend and Indemnify Seller from any claim, suit, or liability based on personal Injury (including death) or property damage related to any Product or part thereof which is fabricated by a third party without Seller's prior written consent and from and against related costs, charges and expenses (including attorneys fees). All copies of Seller's drawings shall remain Sellers property and may be reclaimed by Seller at anytime, 12.END USER If Buyer Is not the end user of the Products sold hereunder (the "End User"), then Buyer will use Its best efforts to obtain the End User's written consent to be bound to Seller by the provisions of paragraphs 3, 4, 5, and 11 hereof. If Buyer does not obtain such End User's consent, Buyer shall defend and indemnify Seller and Seller's agents, employees, subcontractors, and suppliers from any action, liability, cost, loss or expense for which Seller would not have been liable or from which Seller would have been Indemnified if Buyer had obtained such End User's consent. 13.GENERAL (a)Seller represents that any Products or parts thereof manufactured by Seller will be produced in compliance with all applicable Federal, state and local laws applicable to their manufacture and in accordance with Sellers engineering standards. Seller shall not be liable for failure of the Products to comply with any other specifications, standards, laws or regulations. (b)This Agreement shall inure only to the benefit of Buyer and Seller and their respective successors and assigns. Any assignment of this Agreement or any of the rights or obligations hereunder, by either party without the written consent of the other party shall be void. (c)This Agreement contains the entire and only agreement between the parties with respect to the subject matter hereof and supersedes all prior oral and written understandings between Buyer and Seiler concerning the Products, and any prior course of dealings or usage of the trade not Incorporated herein. (d)This Agreement (including these standard terms and conditions of sale) may be modified, supplemented or amended only by a writing signed by an authorized representative of Seller. Seller's waiver of any breach by Buyer of any terms of this Agreement must also be in writing and any waiver by Seller or failure by Seller to enforce any of the terms and conditions of this Agreement at any time, shall not affect, limit or waive Sellers right thereafter to enforce and compel strict compliance with every term and condition thereof. (d)This Agreement and the performance thereof will be governed by and construed according to the laws of the State of Texas. The parties hereto irrevocably submit to the jurisdiction of the Federal and State courts sitting in Tarrant County, Texas and waive any claims as to Inconvenient forum. In the event this Agreement pertains to the sale of any goods outside the United Stales, the parties agree that the United Nations Convention for the International Sale of Goods shall not apply to this Agreement. 14. Legal Fees All legal fees to collect debts owed to seller from buyer shall be paid by the buyer. Al legal fees required to settle Indebtedness of buyer to seller shall be paid In full by the buyer. David Bartlett Hershel Ezzell, P.E. Randall Eulenfeld John Belton san ArRoNo wBent-860604 urnod carprn chit:a daAdLWs1oomg10 L1prrnnerdnH heMWQl isionegdpmertnet randal&lsltonequ�mertnet 3sr7D2sr,as JotnQY1Ms egdpmentrtet Jodie Marbut Ron Shindoll Mike Neill Kelsha Antolne, PhD, PE Matherrard Gadard Amaillo Fwustan C:817-229-04ii 0:214657E066 C: 806676e976 0:8323563903 JodkQrtsloraquipmertmt mnQdsionequprmentnet MkefWslamciLipmeritnet KelshaQiisimequipmertnet www.vislonequipment.net The Advantage of FlexRake° Adaptive TechnologyTM for Low Flow Applications FlexRake® low Flow Cost -Effective Screening for Low Flow Applications Unusually affordable, simple, front cleaning, front return bar screen technology. Specifically designed for plants of 1 mgd or less average flow with channels 2 to 6 feet deep by 1 to 2 feet wide. Available with bar openings of 1/4 inch, 1/Z inch, 3/4 inch and 1 Inch. • Pre -Engineered to be Energy Efficient to Save You Time and Money • Standard Features Include: Easy Controls, Spray Wash for Screenings, All Stainless Steel Construction • Tear -Drop Shaped Bars Provide Highest Efficiency in the Industry; 25%-50% More Efficient • Exclusive Thru-Bar"' Scrapers Clean 3 Sides of the Bar • Proven Duperon" FlexRake" Technology: No Lower Bearings, Sprockets, Jam Points or Confined Space Entries Diu eron°ADAPTIVE TECHNOLOGY'S The Duperon® Flemake® LOW HOW • UHMW Low Flow SmartLink"a— Completely Corrosion -Resistant Links Provide Long Life, Allows for "Dry" Operation • Integral Enclosure Provides Easy Installation Access and Viewing • No Carryover, No Scheduled Lubrication, No Maintenance Headloss vs. Downstream Level o r a r a'• r�"ttan ltN'In Nd,w rr to rr W to nr n n n GENERAL Average flow Capacity: Peak Flow Capacity: Channel Width: Maximum Liquid Level: Screen Area: Bar Opening: Range of Channel Depth: Minimum Water Depth: Discharge Height: Unit Height: Unit DAL Width: Lifting Capacity: Motor Size: UTILITY 1 Phase 3 Phase To learn more about Ouperon'Adaptive Technology; scan [his QR code a visit www.duperon.com lit GPN N 5 a1Ga) ----- 1'S n ----- W'Szeen trz•s.=aen ----- 1H'Snaan 1• Snetr. Ala' S>t:n R'S man Vl'Sn fl -- 1 MGD 4 MGO wide nominal 22" 3.5 It (vertical projection) Yt 112", 3/,' 1' 2' to 6' 0' 32.5" as measured from deck max. 65.5" measured from deck 41.5" measured at widest point S00 lb Ya hp, TEFC Standard (115 volt or 230 volt) (240 volt or 480 volt) PERFORMANCE Scraper spacing: Z0.8' (every third Ilnk) Discharge Rate/Cleaning: Every 24.7 seconds Scraper Travel Speed: 50.5"/minute Sprocket Speed: 1,82 RPM MATERIALS OF CONSTRUCTION Drive Mechanks: 304 Stainless Steel Enclosure /Dead plate: 304 Stainless Steel Screen Bars: 316L Stainless Steel Chain / Scrapers: UHMW PE — UV Stable Motor: Steel with Std OC coatings CONTROL FUNCTIONALITY Emergency Stop • On -Off •Run Monitoring (Ory Contact) Explosion -proof controls avallabte•a' •'•Custom she wiring is necessary with explosion -proof option. Main panel Is remote mounted, explosion proof motor and NEMA 7l9 push button station provided. Wiring completed per local requirements. --�DuperorrADAPTIVE TECHNOIOGY'� Let's Build a System that Works far You' 1200 on Scott Court nvrRataf an ragkleral iratlan I Saginaw, MI 46601 I P 989.754.8800 I F 989.754.2175 I TF 800383.8479 I www.duperon.com W pamn' aM arks W W ptmn Capaation Smadtrnk' and Atlaptiw TacMahQr "am a indamarts JI GUperon Cmrcrat'm lat't 9uttla Sanem tM1aIWJAa for Ycu ^ u a sarvke mad. ofOuparon Corporatbn a CJPrYiprA2Gl4 wP¢ran Capaalbn iGG]/3.n5�lxi iNASHER COMPACTOR Positive Displacement, Dual -Auger System `Paten[ Penc�ing Self -Regulating Campaction Provides a Reliable, No -Hassle Way to Reduce Landfill Costs Robustly simple, high -efficiency, non -hatching process machine that cleans and compacts screenings up to 4 inches. Standard discharge lengths up to 20 feet. • Consistent Compaction Regardless of Debris Size or Volume (Using Proprietary Compaction Zone*) • Positive Displacement: What Goes In, Comes out • Up To 84% Volume Reduction, Up To 60% Dry Solids • Processes Non -Standard Wastewater Debris (Rocks, Clothing, Concrete, Metal) up to 4 inches • Self -Centering Dual Augers Prevent Debris Wrapping • Housing Geometry Controls Potential for "Slip Flow" When Handling Grease, Septage and Similar Debris • Non -Clogging Flood Wash Port: Ideal For Non -Potable Water �Duperon'ADAPTIVE TECHNOLOGY'" Nea•ub uIm/dtBA111/�lKmS OTHER WASHER COMPACTORS DUPERON'� WASHER COMPACTOR CompactionP* Fixed Reduction PO •d Reduction Compaction Zone' Dependent on friction, debris volume and type Depends on mechanical device that controls compaction regardless of size & volume RESULT: inconsistent dry solids RESULT: consistent dry solids Screw Dual AugerSingle ll W 1V 11l O � Debris falls & if itcan move along N flight, it is dragged forvrard Positive displacement (like meat grinder) counter rotation Prone to stoking & then rotating wtauger (not cluing forv2rd) Rights prevenlwrapping and slipflow(The flightof one auger continuously interrupts the OR vapping & owrflowing hopper, churning, slipflow detxiswap ing on tm other auger) Two small augers = less HP, more energy efficient, stretches and stresses debris vdthout chopping or grinding RESULT: werflovdng or wrapped debris not d ivrn forward RESULT: what goes in must go out BRUSHES STRAINER —No Brushes High maintenance & inconsistent performance Self-cleaning strainer as a result of maintained auger contact E)pensiw, potentially labor into nsnre, requires replacement of parts Non -clogging, durable & non-waaring BATCHING CONTINUOUS FLOW• i ? 3 Debris isstored m hopper during batch cycle Conliruous screen operation Can hire odor issues Immedate processing of debris for low odor Low H P = Low energy requirement AGITATION Large motor/gearbox & batch times Consistent high-pressure throughoutsystan Complenty of controls Wash ports — flood vs. high maintenance fine spray nozzles Maintenance, energy, storage & possible overflow Wash ports located prior to compaction so debris is not forced into nozzle openings No Splashing WC BODY1 • '-/< HP Motor typical • For bar screens up to 2' wide • Ideal for FlexRake® Low Flow units • Generally for flows less than 15MGD WC BODY 2 • 3/<, 3, 5 HP motors • For bar screens 2'to 6' wide • Flows up to 60 MGD • 3 and 5 HP conveyor -fed and industrial applications DISCHARGE EXTENSION OPTION • 3/<<, 3, 5 HP motors • For bar screens 5'to 1O' wide • Flows up to 100 MG • 3 and 5 HP conveyor -fed and Industrial applications s option is available for the Duperon® Washer Compactor and can nsport debris up to 40 feet in any direction, eliminating the need for fltional motorized conveyance systems. With debris being compressed x to the discharge chute, extended transport distance and elevation Ichieved with little or no resistance and is unaffected by extended ention times. It contains no moving parts to fail and can operate ltinually if required. te: Screenings compaction !s achieved without the use of a compaction using 1n this configuration. WATER • Utilizes filtered effluent or municipal water • Vdasher consumes 3-10 gallons per minute • Requires 40 PSI-60 PSI • Drain connection 3' NPT • Supply connection 1/Z' NPT UTILITY • 120240 volt single phase • 240/480 volt three phase (0.6 kW23 kW/3.8kW1 DRIVE 3/4 HP, 3 HP, S HP inverter duty motors available MATERIALS OF CONSTRUCTION • 304 SSTL or316 SSTL • SSTL spur gears (17 - 4 Pt� • Self-lubricating main auger bearings TYPICAL PERFORMANCE • 30°0 - 60% drysolids • 609n-70:bweightreduction • Significantly decreases odor and fecal content CAPACITY Available from: 30 ft3/hour to 150 ft'/hour MAINTENANCE Five years: Recommended gearbox service BAGGER: The Bagger System attaches to the discharge chute for applications where bag dispensing and odor control are required. Included Is a 100 meter length of continuous feed bags. SPECIFICATIONS: LATCH AND HOLDER: 304 SS or 316 SSTL BAG: 1.3 mil Polyethylene BAG SIZE: 22" Diameter x 295 ft. length DROP SLEEVE: This flexible Drop Sleeve is an economical way to direct and contain downward debris discharge. Also used where waste container hauling may cause damage to metal discharge chutes. SPECIFICATIONS: LATCH AND HOLDER: 304 SS/316 SSTL SLEEVE: Heavy Duty Urethane Canvas ACCESS CHUTE: In applications that Involve periodic Inspection of discharging sol(ds, the Access Chute with Inspection panel is available in modular segments, Installed as needed in the discharge chute system. SPECIFICATIONS: CHUTE: 14 ga. 304/316 SSTL FLANGES:1/4" DRAW TYPE LATCHES:Hinged and Latched or Latched Both Sides CASTER ASSEMBLY: Optional casters allowforflexible placement of the Washer Compactor and simple movement of the un(t. SPECIFICATIONS: CASTERS: Urethane Wheels, 304/316 SSTL FRAME: 2x2x1/4 Tubular, 304/316 LOCKING CASTERS EXPLOSION PROOF ELEC, DISCONNECT HEAT BLANKET: The Compaction Zone and discharge chute can be thermally protected from cold temperatures with the addition of the Heat Blanket with Integral heat trace. SPECIFICATIONS: EXPLOSION PROOF HEAT TRACE SYSTEM (All connections NEMA 7/9} 10 W/FT = 600 w max, 120V HARD CONTACT THERMOSTAT (NEMA 7/9) INSULATED BLANKET: All Weather Teflon 1Z00 Leon Scott Caurt) Saginaw, MI 48601 I P 989.754.8800 1 F 989.754.2175 1 TF 800.383.8479 � www.duperon.com Parcor r:m�a. 000er�i:aroyinFaa raneRan aoceroar r�.n.akuMera&nuogY"me+radomarcdoucermcomownm®ryrrynrzou. oucerweucaeim zosivnrmr IaCR�YCT. [(IRYII', ��= _ _1 61 1�.. "127 Exhibit B HOWARD CONSTRUCTION, INC. P.O. Box 1685, Ardmore, OK 73402 402 I Street NW, Ardmore, OK 73401 (580) 226-4700 Fax (580) 798-5077 April 19, 2021 Cify of Anna 3223 N. Powell Parkway Anna, TX 75409 Attn: Chip Hopkins RE: City of Anna W WTP Installation of new Duperon F1ex1take Bar Screen Dear Mr. Hopkins, HCI was contacted by John Belton with Vision Equipment to provide a proposal for installation of a new Duperon FlexRake Bar Screen at the City of Anna WWTP located in Anna, Texas. Our proposal is based upon Duperon Proposal Number 10148 R5 dated March 15, 2021 and pictures of the existing Arena W WTP bar screen provided by Vision Equipment. HCI and Vision Equipment recently worked together on installation of a new bar screen at the Bridgeport, Texas W WTP. City of Anna will direct purchase the new bar screen. HCI will provide personnel and equipment required for removal of the existing screen and installation of the new screen. This will include electrical services to install the new screen control panel and service to the new screen, anchors as required and startup assistance. Cl includes General Liability and Workers Compensation Insurance, SINGLE SCREEN OPTION SCOPE: • Provide personnel to assist City of Anna in review of submittals and verifrcation of Duperon requirements. • Removal of existing bar screen. • Install Duperon F1exRake Bar Screen. • Install Control Panel and Electrical service to bar screen. • Assist Duperon in startup of new screen. PRICE: Twenty Five Thousand Eight Hundred Dollars ($25,800.00) SCREEN OPTION o vQuperon Proposal # 10148 R30 SCOPE: • Provide p>Ianclaini6d City of Dupero • Removal , • Install twon Fit in review of submittals and verification $ar Screens. • Install Co lectrical to bar screen. • Assis iperon with startup of new screens, Forty Tluce Thousand Eight Hundred Dollars EXCLUSIONS: • Modifications to lift station of any kind • By Pass pumping. • Sales Tax • Performance and Payment Bond Please contact me with any questions Tha�ilcs for the opportunity! Michael Howard Exhibit C separation end process Proposal Reference to Project Scope #21-0722-01 July 22, 2021 City of Anna Texas 1400 Roadrunner Rd. Anna, TX 75409 1-ALRICK Belt Press Restoration July 22, 2021 David Trevino City of Anna Anna, TX RE: Proposal for Restoration for 1 (one) — ALRICK Belt Press Dear Mr. Trevino, Thank you for your interest in the services of Langley Separation and Process LLC., we are pleased to provide you with the following proposal. Langley Separation and Process LLC proposal is for the parts and labor on (one) ALRICK Belt Press. The OEM parts are for the replacement, involving the following: Section 1: Ttems 1 parts listed below will be replaced: • 1- 4-BV Bleeder Valve • 1- Speedaire Air Line Filter • 1- ControlAir Type 400 BXK Air Pressure Regulator • 38- VPE 231 Pillow Block • 14- VPE 224 Pillow Block • 4- VTWE 231 Take Up Unit • 4- VF2S231 Browning Bearing • 4- VF4S356 4 Bolt Flange • 1- Boston Motor A-C Motor 1 HP 17000RPM • I- Boston Motor A-C Motor 1 1/2 HP 17000RPM • 1- Boston Reducers F730-60S-B7-G • 1- Boston Reducers F732060S-B7-G • 2- Sprocket 60B60 X 1 15/ 16 Keyway and set screws • 2- Sprocket 60B 12 X 1 '/a • 2- Sprocket 60BS34 X 1 15/16 • 2- Sprocket 6013 X 1 3/8 • 2- Spur Gears TC896 X 1 15/16 • 4- Tension 3 X 8 SB 3.0 SPUS 16 8 STRK SP CYL • 2- Tracking 2.5 X 4 16 6 • 2- Bellows "B5C" Air Control Valves V - 360FP • 60- 1 1/2' Flat Fan Nozzles W/gasket only • l- 6' x T 700 Micron Screen • 2- UHMW Polyethylene 1/4" TH x 4" W x 42" L • 1- Right Angle Syncrogear • 3- Chains Section 2 Sueaested Line Ttems Parts (not included in urice� 1-Replacement Stator for Netsch Cavity Purnp = $1,183.00 2- d0"x 56'3"Replacement Press Belts it/10 Clip Per Inch Urethane = $2,002.56 1- Booster Pump = $2,538.95 1. Polymer pump = $9,1930 00 Section 3: );xclusior►s: Taxes and fees freight (cost plus 20%) Discovery items .., related to parts (cost plus 20%) Section 4: Price Parts, labor and expenses for restoration as described in Section 1 Total $33,422.50 Paymenf Terms for Parts: GO% placement of order 40% upon completion Langley Separation and Process estimates a time of 7 days. Since there are unforeseen circumstances and unknown wnditions until time of work is perform the estimated time frame is subject to change. The following is some of those variables: 1. Additional parts required after removal of old parts 2. Shipping delays for receivables Langley Separation and Process LLC, reserves the right to provide change orders for any additional services, parts, and labor required thru the entire retrofitting of the press and or if the client request additional services and labor not listed within the proposal, The client is responsible for providing the following: I. );lectrical (110 volt) for operation of hand tools and air compressors 2. Loading and off-loading of parts 3. Disposal of old parts Does not include any automatic lubrication parts if applicable. Plus, all services are based upon disassemble and reassembly completed at site. Langley Separation and Process LLC has available numerous mobile belt press and all apparatuses for rental to continue dewatering during the duration of the refurbishing. The temporary belt presses are dependent on timing, location and space availability at the project site a separate proposal can be provided. Langley Separation and Process LLC. would like to thank you for the opportunity in submitting a proposal for the restoration of your (one) ALRick Belt Press If you have any questions or need clarifications, please do not hesitate to call. Sincerely, Tony Langley President Langley Separation and Process LLC Main contacts for this project: Tony Langley President 817-269-8388 tony�llangleyseparation.com Cheryl Hendersou Project coordinator 512-662-9917 cher ly @langleyseparation.com &LANGLEY Standard Terms of Sale separation and process i. Applicable Terms. These terms govern the purchase and sale of fire equipment and related services, if any (collectively, "Equlpntent"), referred to In Seller's purchase order, quotation, proposal or acknowledgment, as the case maybe ("Seller's Documentation"). Whether these terms are Included in an offer or an acceptance by seller, such offer or acceptance is conditioned on Buyers assent to these terms. Seller rejects all additional or different terms in any of Buyer's forms or documents. 2. Payment. Buyershall pay Selierfhe full purchase price as set forth in Seller's Documentation. Unless Sellers Documentallon provides otherwise, Trelght, storage, Insurance and all taxes, duties or other governmental charges relating to the Equipment shall be paid by Buyer. IF Seller Is required to pay any such charges, Buyer shall Immediately reimburse Seller. All payments are due within 30 days after receipt of Invoice. Buyer shall be charged the lower of 1)S%Interest per month or the maximum legal rate on all amounts not received by the due date and shall pay all of Seller's reasonable costs (including attorneys' fees) of collecting amounts due but unpald. All orders are subject to credit approval. - 3. Delivery. Delivery of the Equipment shall be In material compliance with the schedule in Sellers Documentation. Unless Seller's Documentation provides otherwise, Delivery terms are F.O.B. Seller's facility. 4.Ownershlp of Materials. All devices, designs (Including drawings, plans and specifications), estimates, prices, notes, electronic data and other documents or information prepared or disposed by Seller, and ail related Intellectual property rights, shall remain Sellers property. Seller grants Buyer anon -exclusive, non- transferable license to use any such material solely for Buyers use of the Equipment. Buyer shall not disclose any such material to third parties without Sellers prior written consent. S. Changes. Seller shall not Implement any changes In the scope of work described in Seller's Documentation unless Buyer and Seller agree in writing to the details of the change and any resulting price, schedule or other contractual modlFlcations.This Includes any changes necessitated by a change In appllable law occurring after the effective date of any contract including these terms. 6. Warranty. Subject to the following sentence, Seller warrants to Buyer that the Equipment shall materially conform to the description in Sellers Documentation and shall be free from defects In material and workmanship. The foregoing warranty shall not apply to any Equipment that Is speclFled or otherwise demanded by Buyer and Is not manufactured or selected by Seller, as to which (I) Seller hereby assigns to Buyer, to the extent assignable, any warranties made to Seller and (II) Seller shall have no other liability to Buyer under warranty, tort or any other legal theory. If Buyer gives Seller prompt written notice of breach of this warranty within 18 months from delivery or 1 year from acceptance, whichever occurs first (the "Warranty Period"), Seller shall, at Its sole option and as Buyer's sole remedy, repair or replace the subject parts or refund the purchase price therefor. IF Seller determines that any claimed breach Is not, In fact, covered by this warranty, Buyer shall pay Seller Its then customary charges for any repair or replacement made by Seller. Sellers warranty is conditioned on Buyers (a) operating and maintaining the Equipment In accordance with Sellers Instructions, (b) not making any unauthorized repairs or alterations, and (c) not being In default of any payment obligation to Seller. Sellers warranty does not cover damage caused by chemical action or abrasive material, misuse or Improper Installation (unless Installed by Seller). THE WARRANTIES SET FORTH IN THIS SECTION ARE SELLER'S SOLE AND EXCLUSIVE WARRANTIES AND ARE SUBJECT TO SECTION 10 BELOW, SELLER MAKES NO OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE, 7.Indemnity. Seller shall Indemnify, defend and hold Buyer harmless from any Balm, cause of action or liability Incurred by Buyer as a result of third party claims for personaI Injury, death or damage to tangihle property, to the extent roused by Sellers negligence. Seller shall have the sole authority to direct the defense of and settle any Indemnified claim. Sellers Indemnification Is conditioned on Buyer (a) promptly, within the Warranty Period, notifying Seller of any claim, and (b) providing reasonable cooperation In the defense of any claim. B. Force MaJeure. Neither Seiler nor Buyer shall have any liability for any breach (except for breach of payment obligations) caused by extreme weather or other act of God, strike or other labor shortage or disturbance, tire, accident, war or civil disturbance, delay of carriers, failure of normal sources of supply, act of government or any other cause beyond such party reasonable control. 9. Cancellation. If Buyer cancels or suspends Its order for any reason other than Sellers breach, Buyer shall promptly pay Seller for work performed prior to cancellation or suspension and any other direct costs Incurred by Seller as a result of such cancellation or suspension, 30. LIMITATION OF LIABILITY, NOTWITHSTANDING ANYTHING ELSE TO THE CONTRARY, SELLER SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, PUNITIVE OR OTHER INDIRECT DAMAGES, AND SELLER'S TOTAL LIABILITY ARISING AT ANY TIME FROM THE SALE OR USE OF THE EQUIPMENT SHALL NOT EXCEED THE PURCHASE PRICE PAID FOR THE EQUIPMENT. THESE LIMITATIONS APPLY W NETHER THE LIABILITY IS BASEO ON CONTRACT, TORT, STRICT LIABILITY OR ANY OTHER THEORY. 11. Miscellaneous. If these terms are Issued In connection with a government contract, they shall be deemed to include those federal acquisition regulations that are required bylaw to be Included. These terms, together with any quotation, purchase order or acknowledgement Issued or signed by the Seller, comprise the complete and exclusive statement of the agreement helween the parties (the "Agreement")and supersede any terms contained In Buyers documents, unless separately signed by Seller. No part of the Agreement maybe changed or cancelled except by a written document signed by Seller and Buyer. No course of dealing or performance, usage of trade or failure to enforce any term shall be used to modify the Agreement. If any of these terms is unenforceable, such term shall be limited only to the extent necessary to make It enforceable, and all other terms shall remain In full force and effect. Buyer may not assignor permit any other transfer of the Agreement without Sellers prior written consent. The Agreement shall be governed by the laws of the Commonwealth of Pennsylvania without regard to Its conflict of laws provislons. 12. Export Compliance. Buyer acknowledges that seller Is required to comply with applicable export laws and regulations relating to the sale, exportation, transfer, assignment, disposal and usage of the Equipment and Services provided under the Contract, Including any export license requirements. Buyer agrees that such Equipment and Services shall not at any time directly or indirectly he used, exported, sold, transferred, assigned or otherwise disposed of Ina manner which will result In non-compliance with such applicable export laws and regulations, It shall be a condition of the continuing performance by seller of Its obligations hereunder that compliance with such export laws and regulations be maintained at all time. BUYER AGREES TO INDEMNIFY AND HOLD SELLER HARMLESS FROM ANY AND ALL COSTS, LIABILITIES, PENALTIES, SANCTIONS AND FINES RELATED TO NON-COMPLIANCE WITH APPLICABLE EXPORT LAWS AND REGULATIONS. 051ODuPLIQUIOSISOLIDSeron®ADAPTIVE TECHNOLOGYTM PRELIMINARYSEPARATIONSYSTEMS Date: March 15, 2021 Project: City of Anna, TX Owner: Troy Hopkins City of Anna, TX Duperon Contact: Brandon Dayton —Sales Project Manager bdayton@duperon.com Mark Hickok —Regional Sales Manager mhickok@duperon.com (989) 492-0289 Proposal # 10148 R5 Local Representation: John D. Belton on Equipment 2720 Fallcreek Dr. Carrollton, TX 75006 (972)922-3126 john@visionequipment.net To: Troy Hopkins Duperon is pleased to offer the following scope of supply including mechanical bar screen and accessories, as listed in the scope of supply. Please also refer to Duperon Terms and Conditions attached. We appreciate the opportunity to provide the following pricing for the screening requirements at the City of Anna project. We look forward to the opportunity to work with you and thank you for your consideration. Duperon Corporation � 1200 Leon Scott Court � Saginaw, MI 48601 � P 989.754.8800 � F 989.754.2175 � TF 800.383.8479 www.duperon.com FIRM PRICE Proposal Number P10148 R5 Scope of Supply: City of Anna, TX (1) Mechanically Cleaned Bar Screen- Link Driven, Front Cleaning, Front Return • FlexRake®Model 0 LF, LowFlow — Outdoor Installation • Continuous Cleaning, top to bottom, the entire width of scraper • Continuous Cleaning without an operator • Scrapers of UV Stabilized UHMW-PE • Self-lubricating, long -wearing UHMW-PE components • UV Stable UHMW-PE self-lubricating, long -wearing SmartLinks • SSTL304 side fabrications, dead plate and cross members • SSTL304 full enclosure covering from deck to discharge. • SSTL316 bar screen material • SSTL304 2 inch close outs to channel wall, both sides of the rake • SSTL304 debris shield to deflect debris into washer compactor hopper • SSTL304 4 inch curb adapter • 27.25 in bar screen length • Head Sprocket Only Design — no critical components underwater • Fully enclosed with front and rear easily removable panels • 1.00 ft of head differential structural design • 30 degrees from vertical • Bar opening:.25 inch • 0.50 MGD Average flow • 1.00 MGD Peak flow • 22 inch maximum water level • 1.50 ft inlet channel width • 4.50 ft inlet channel heigh • Gravity of pumped flow • 715 Ibs approximate weight Estimated Anchor Bolts Needed Mechanical Bar Screen: Estimated Anchor Bolts Needed for FlexRake (not included in scope of supply —by Others/Contractor): • Anchor Bolts —per FlexRake Bolts for anchor toes and plates o (4) 12 mm (1/2 inch) diameter x 115 mm (4-1/2 inch) long Embed HAS Rods w/ Hilti RE-50043 Adhesive System • Above quantities not guaranteed as accurate, final quantities will be outlined in submittals. (1) Duperon® Washer Compactor -Dual Auger System • Model WC3.A2.5 0 314HP Motor and gearbox 0 3.29 ft from operating deck to top of washer compactor hopper rim 0 4.66 ft long hopper length 0 1.45 ft wide hopper width o SSTL304 o SSTL304 Custom hopper per dimensions above • Reduced Maintenance o Accepts variable debris up to four inches, including rocks, clothing, concrete, metal, grease and septage — eliminating jams and equipment shutdown o Positive displacement technology assures that all debris which enters the hopper is washed, compacted, and discharged for disposal Duperon Corporation � 1200 Leon Scott Court � Saginaw, MI 48901 � P 989.754.8800 I F 989.754.2175 � TF 800.383.8479 www.duperon.com FIRM PRICE Proposal Number P10148 R5 City of Anna, TX o Durable dual auger design eliminates debris wrapping o Non -clogging flood wash port located prior to compaction housing — ideal for non - potable water • Reduced Odor o Up to 60% dry solids and up to 60% mass/weight reduction — significantly reducing fecal content and odor • Reduced Landfill Costs o Up to 84% volume reduction 0 Self -Regulating Compaction Housing — allows for consistent dry solids output regardless of fluctuations in debris volume • Reduced Power Consumption 0 3/ HP inverter duty motor consumes just 576 watts o Requires .4 KWH Discharge chute design • 10.00 ft long discharge chute with, (1) bend, (1) chute support Water supply and drain criteria • Non -Clog Flood Washing • Utilizes filtered effluent or municipal water • Consumes 3 to 10 gallons per minute at 40 to 60 PSI • 3.00 inch NPT male drain connection • 0.50 inch NPT water supply connection Estimated Anchor Bolts Needed for Washer Compactor: Estimated Anchor Bolts Needed (not included in scope of supply — by Others/Contractor): • Anchor Bolts Bolts for anchor toes and plates o (4) 12 mm (1/2 inch) diameter x 115 mm (4-1/2 inch) long Embed HAS Rods w/ Hilti RE-500-V3 Adhesive System • Above quantities not guaranteed as accurate, final quantities will be outlined in submittals. (1) Controls Package, Main Panel • NOTE: Referencing NFPA 820, the main control panel shall be removed from the equipment/channel by a minimum of 10 feet. • Main fusible disconnect for incoming power 480V/60hz/3ph • Wall mount NEMA 4X SSTL304 enclosure • Enclosure to be: o Located outdoors in an unclassified area o Located where temperatures drop below 0°C (32°F) frequently o Located where temperatures exceed 40°C (105°F) frequently • Enclosure to include equipment o (1) LowFlow FlexRake with 1/4HP motor driven by AC Tech VFD with panel mounted keypad 0 (1) Washer Compactor with 3/4HP motor driven by AC Tech VFD with panel mounted keypad • Relay Based logic, to include o Pilot lights, push buttons and selector switches on front door o Terminal blocks, ETM's, breakers, and relays where required o Hand -Off -Auto selector switch uses PB station in Hand mode o Hard contact SCADA Interlock(s) Run, No Fault, Auto, Remote start o Adjustable on/off cycle timers o Machine runs when remote start contact is made or run timer is active, it doesn't speed up unless a float is selected 0 Line reactor o Load Reactor Duperon Corporation � 1200 Leon Scott Court � Saginaw, MI 48601 � P 989.754.8800 � F 989.754.2175 � TF 800.383.8479 www.duperon.com FIRM PRICE City of Anna, TX Proposal Number P10148 R5 o HydroRanger 200HM1 • Weather protection devices inside enclosure o Heater, thermostat, panel air conditioner Instrumentation • Dual Float Level Control o (2) Mechanical Float Switch including 50 ft long cabling. Local to equipment mounted devices • (2) Three Button NEMA 4/719 Enclosure for E-Stop, Jog -Reverse and Forward Bar Screen Spare Parts • (10) Snap Rings • (4) Link Clevis Pins • (4) Hex Head Cap Screw • (4) Scraper Nut • (1) Snap Ring Tool • (1) 1 oz. Never Seez tube Washer Compactor Spare Parts • (2) Upper/Lower Support: Auger • (2) Side Support: Auger • (24) FHCS: 0.25-20xl • (24) 0.25 Flat Washer SAE • (24) 0.25 Nylock Nut • (1) 1 oz. Never Seez • (1) 14 oz grease tube On Site Technical Assistance • (1) Trip(s) • (1) Technician • (2) 8 hour man-day(s) total onsite • If additional Technical Service days are required, please add per the rates included in the Clarifications section of this scope of supply. Operation and Maintenance Manuals • 6 Hard Copies Warranty • One Year Standard material and workmanship Freight to Jobsite Included Price: $149,750.00 Price is valid for 60 days from bid date. Delivery: • Submittals: 4-6 weeks after approved purchase order, based on workload • Equipment Delivery: 8.12 weeks after approval based on workload • FOB Jobsite, Freight Paid Exceptions: • As noted Duperon Corporation 1 1200 Leon Scott Court � Saginaw, MI 48601 � P 989.754.8800 � F 989.754.2175 � TF 800.383.8479 www.duperon.com FIRM PRICE Proposal Number P10148 R5 Clarifications: General Clarifications City of Anna, TX • Prices are valid for 60 days unless stated otherwise in the proposal • See Duperon Contractor Installation Guides for guidance in estimating these costs. • Duperon requires 3 week's advanced notice in writing to schedule field service technician on site. • Field Services will be provided as outlined in this proposal. Duperon field service rate is $750 per day plus travel and per diem expenses. If field service personnel arrive on site as scheduled and the project is not ready for intended services to be performed, Duperon will invoice for additional days, if required. If the time required is greater than the time listed in this proposal, Duperon will invoice at the above rates. Bar Screen Clarifications • The bar screen will be shipped fully assembled • The LowFlow screen was not designed to manage septage. • A standard minimum downstream water depth of 1.00 ft is required for Flexrake to prevent galling of the moving SSTL parts. Modifications such as a sloped sump or downstream underflow weir may be necessary and is to be provided by others. • It is recommended on sites with solid plate/grating across channels; that channel ventilation connection points occur upstream of mechanical screening equipment as necessary to relieve the channel fumes from exhausting only through the equipment enclosure • Freeze protection • Field assembly of SSTL screen enclosure and side shields required. • Some minor field welding will be required at the top of the channel support bar and at the operating deck anchor points. • Crane may be required for unloading. • Spreader bar may be required for unloading • Scope of supply and pricing above does not include additional structure for seismic, additional head differential or wind conditions. Washer Compactor Clarifications • Some minor field assembly required • Water supply and discharge piping by others • Mounting hardware by others Controls Clarifications • All conduit and field wiring between the equipment by others • Mounting hardware by others Not Included: • Anything not specifically stated in this Proposal. • Bonding, tariffs, permits, taxes, liquidated damages. • Construction and /or installation work of any kind at the jobsite. • On -site conditions affecting the work described or which affects the installation. • Conduit, stands, control mounting wiring, junction boxes, or other accessories. • Any site work or installation tasks (ie, unloading, placement, dewatering, diving, clearing the forebay, wiring, provision of concrete structure, etc.), equipment (such as cranes, hammer drills, etc.), or anchor bolts. • Pre -installation tasks such as touch-up painting, checking bolts for tightness, removal of shipping containment devices, etc. • Engineering: Does not include drawings other than those for the FlexRake. • Additional structure for seismic or wind conditions. Duperon Corporation � 1200 Leon Scott Court � Saginaw, MI 48601 � P 989.754.8800 � F 000 79A 03479 � TF 800.383.8479 www.duperon.com � 1 S1 Oil quipment TEXAS • NEW MEXICO © OKLAHOMA Vision Equipment and Consulting STANDARD TERMS AND CONDITIONS OF SALE 1. TERMS APPLICABLE The Terms and Conditions of Sale listed below are the exclusive terms and conditions applicable to quotations made and orders accepted by Vision Equipment and Consulting ("Seller") for the sales of products, equipment and parts relating thereto ("Products"). This quotation or acknowledgment and acceptance is expressly made conditional upon Buyer's assent to such terms and conditions. Any of Buyer's terms and conditions which are in addition to or different from those contained herein, which are not separately agreed to by Seller in writing, are hereby objected to and shall be of no effect. Objections to any terms and conditions contained herein shall be deemed waived if Seller does not receive written notice thereof within 20 days of the date of this acknowledgment. Buyer in any event will be deemed to have assented to the terms and conditions contained herein if Buyer either makes any payment to Seller or accepts any delivery of the Product. The term "this Agreement" as used herein means this quotation or acknowledgment together with any attachment hereto, any documents expressly incorporated by reference and these Standard Terms and Conditions of Sale. 2. DELIVERY (a)Delivery dates are good faith estimates and do not mean that "time is of the essence". Buyer's failure to promptly make advance or interim payments, supply technical information, drawings and approvals will result in a commensurate delay in delivery. Unless otherwise agreed in writing by Seller, title and risk of loss or damage to the Products shall pass to Buyer upon delivery o the Products F.O.B., Seller's plant (F.O.B., point of manufacture for any Product shipped direct to Buyer from any location other than Seller's plant). (b)Seller shall not be liable for any loss or delay due to acts of governmental authority, laws or regulations, strikes, fires, floods, earthquakes, severe weather, epidemics, quarantine restrictions, war, riot, acts of Buyer, wrecks, delays in transportation, inability to obtain necessary labor or materials from usual sources, or other causes beyond the reasonable control of Seller. In the event of any such delay in performance due to such causes, the date of delivery or performance shall be deferred for a period equal to the time lost by the reason of the delay. 3. WARRANTY (a)Seller warrants to Buyer that the Products will be delivered free from defects in material and workmanship. This warranty shall commence upon delivery of the Products and shall expire on the earlier to occur of 12 months from initial operation of the Products and 18 months from delivery thereof (the "Warranty Period"). If during the Warranty Period Buyer discovers a defect in material or workmanship and gives Seller written notice thereof within 10 days of such discovery, Seller will, at its option, either deliver to Buyer a replacement part or repair the defect in place. Seller will have no warranty obligations under this paragraph 3(a): (i) if Buyer fails to ensure that the Products are operated and maintained in accordance with generally approved industry practice and with Seller's specific written instructions; (ii) if the Products are used in connection with any mixture or substance or operating condition other than that for which they were designed; (III) if Buyer fails to give Seller such written 10 day notice; (iv) if the Products are repaired by someone other than Seller or have been intentionally or accidentally damaged, or (v) corrosion, erosion, ordinary wear and tear or in respect of any parts which by their nature are exposed to severe wear and tear or are considered expendable. (b)Seller further warrants to Buyer that at delivery, the Products will be free of any liens or encumbrances. If there are any such liens or encumbrances, Seller will cause them to be discharged promptly after notification from Buyer of their existence. (c)THE EXPRESS WARRANTIES SELLER MAKES IN THIS PARAGRAPH 3 ARE THE ONLY WARRANTIES IT WILL MAKE, THERE ARE NO OTHER WARRANTIES, WHETHER STATUTORY, ORAL, EXPRESS OR IMPLIED, IN PARTICULAR, THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. (d)The remedies provided in paragraphs 3(a) and 3(b) are Buyer's exclusive remedy for breach of warranty. 4. LIMITATION OF LIABILITY The remedies of buyer set forth herein are exclusive and the aggregate liability of seller for all claims of any kind for any loss or damage resulting from, arising out of or connected with this agreement or from the performance or breach thereof, or from the manufacture, sale, delivery, resale, repair or use of any product, shall in no event exceed the price allocable to the product which gave rise to the claims. The foregoing notwithstanding, if applicable, any claims for (a) delay shall not exceed 10% and (b) breach of performance guarantees shall not exceed 20% of the price. In no event shall seller be liable to buyer or any party for special, incidental or consequential damages of any nature, including, but not limited to, loss of profits or revenue or business opportunity, loss by reason of shutdown of facilities or inability to operate any facility at full capacity, or cost of obtaining replacement power. The limitations and exclusions of liability set forth in this paragraph shall apply to any claim, whether based on contract, warranty, tort (including negligence), fault, strict liability, indemnity, or otherwise. All liability of Seller to Buyer, arising out of this Agreement, shall terminate at the expiration of 3 years after final acceptance. The provisions of this paragraph 4 shall supersede any inconsistent provisions in any instrument forming part of this agreement. 5. TAXES Seller's prices do not include any sales, use, excise or other taxes. In addition to the price specified herein, the amount of any present or future sales, use, excise or other tax applicable to the sale or use of the Products shall be billed to and paid by Buyer unless Buyer provides to Seller a tax -exemption certificate acceptable to the relevant taxing authorities. 6. SECURITY INTEREST Seller shall retain a purchase money security interest in the Products until all payments have been made in full. Buyer agrees to do all acts necessary to perfect and maintain such security interest in Seller and to protect Seller's interest in the Products. •SOUTHEASTTEXAS CORPUS• David Bartlett San Antonio C:210-381-4030 david@visionequlpme ntnet Jodie Marbut Weatherford C: 817-229-0411 lod ieCaMs ionequipment.net Hershel Ezzell, P.E. Kingwood C: 281-8505414 hershel(alvisionequipment.ret Ron Shindoll Garland O: 2149575066 ron�W1s ioneq u ipment.net Randall Eulenfeld Corpus ChristiC: 361a19-2286 rand al@vislonequ ipment net Mike Neill Amarillo C: 806$76$975 M ike@vis ioneq u ipntent.net John Belton Dallas C: 972-9223126 john@vlsionequipment.net Keisha Antoine, PhD, PE Houston 0:832a563903 Keisha@visionequipmentnet www.visionequipment.net Vision � Equipment TEXAS •NEW MEXICO • OKLAHOMA 7. SET OFF Neither Buyer nor any of its affiliates shall have any right to set off claims against Seller or any of its affiliates for amounts owed under this Agreement or otherwise. 8. PATENTS Unless the Products or any part thereof are designed to Buyer's specifications and provided the Product or any part thereof is not used in any manner other than as specified or approved by Seller in writing, (1) Seller shall defend against any suit or proceeding brought against Buyer to the extent based on a claim that any Product, or any part thereof, infringes any United States patents; provided Seller is notified promptly in writing and given authority, information and assistance for the defense of such suit or proceeding; (ii) Seller shall satisfy any judgment for damages entered against Buyer in such suit; and (III) if such judgment enjoins Buyer from using any Product or a part thereof, then Seller shall at its option: (a) obtain for Buyer the right to continue using such Product or part; (b) eliminate the infringement by replacing or modifying all or part of the Products; or (c) take back such Product or part and refund to Buyer all payments on the purchase price which Seller has received, in which case neither Buyer nor Seller will have any claim against the other under this Agreement or arising out of the subject matter of this Agreement. The foregoing states Seller's entire liability for patent infringement by any Product or part thereof. 9. CANCELLATION Buyer may only cancel its order for cause agreeable to the Seller and upon written notice to Seller and upon payment to Seller of Seller's cancellation charges, which shall be specified to Buyer and shall take into account among other things expenses (direct and indirect) incurred and commitments already made by Seller and an appropriate profit. In the event of the bankruptcy or insolvency of Buyer or in the event of any bankruptcy or insolvency proceeding brought by or against Buyer. 10.CHANGES Seller will not make changes in the Products unless Buyer and Seller have executed a written Change Order for such change. Such Change Order will include an appropriate price adjustment. If the change impairs Seller's ability to satisfy any of its obligations to Buyer, the Change Order will include appropriate modifications to this Agreement. If after the date of this quotation or acknowledgment, new or revised governmental requirements should require a change in the Products; the change will be subject to this paragraph 10. 11.CONFIDENTIALITY Buyer acknowledges that the information which Seller submits to Buyer in connection with this quotation or acknowledgment includes Seller's confidential and proprietary information, both of a technical and commercial nature. Buyer agrees not to disclose such information to third parties without Seller's prior written consent. Buyer further agrees not to permit any third party to fabricate the Products or any parts thereof from Seller's drawings. Buyer will defend and indemnify Seller from any claim, suit, or liability based on personal injury (including death) or property damage related to any Product or part thereof which is fabricated by a third party without Seller's prior written consent and from and against related costs, charges and expenses (including attorneys fees). All copies of Seller's drawings shall remain Seller's property and may be reclaimed by Seller at any time. 12.END USER If Buyer is not the end user of the Products sold hereunder (the "End User"), then Buyer will use its best efforts to obtain the End User's written consent to be bound to Seller by the provisions of paragraphs 3, 41 5, and 11 hereof. If Buyer does not obtain such End User's consent, Buyer shall defend and indemnify Seller and Seller's agents, employees, subcontractors, and suppliers from any action, liability, cost, loss or expense for which Seller would not have been liable or from which Seller would have been indemnified if Buyer had obtained such End User's consent. 13.GENERAL (a)Seller represents that any Products or parts thereof manufactured by Seller will be produced in compliance with all applicable Federal, state and local laws applicable to their manufacture and in accordance with Seller's engineering standards. Seller shall not be liable for failure of the Products to comply with any other specifications, standards, laws or regulations. (b)This Agreement shall inure only to the benefit of Buyer and Seller and their respective successors and assigns. Any assignment of this Agreement or any of the rights or obligations hereunder, by either party without the written consent of the other party shall be void. (c)This Agreement contains the entire and only agreement between the parties with respect to the subject matter hereof and supersedes all prior oral and written understandings between Buyer and Seller concerning the Products, and any prior course of dealings or usage of the trade not incorporated herein. (d)This Agreement (including these standard terms and conditions of sale) may be modified, supplemented or amended only by a writing signed by an authorized representative of Seller. Seller's waiver of any breach by Buyer of any terms of this Agreement must also be in writing and any waiver by Seller or failure by Seller to enforce any of the terms and conditions of this Agreement at any time, shall not affect, limit or waive Sellers right thereafter to enforce and compel strict compliance with every term and condition thereof. (d)This Agreement and the performance thereof will be governed by and construed according to the laws of the State of Texas. The parties hereto irrevocably submit to the jurisdiction of the Federal and State courts sitting in Tarrant County, Texas and waive any claims as to inconvenient forum. In the event this Agreement pertains to the sale of any goods outside the United States, the parties agree that the United Nations Convention for the International Sale of Goods shall not apply to this Agreement. 14. Legal Fees All legal fees to collect debts owed to seller from buyer shall be paid by the buyer. All legal fees required to settle indebtedness of buyer to seller shall be paid in full by the buyer. David Bartlett Hershel Ezzell, P.E. Randall Eulenfeld John Belton San Antonio Kingwood Corpus Christi Dallas C: 210381.4030 C: 281.8505414 C: 361319-2286 C: 972-9223126 david@risionequipment.net hershel@visionequipmerd.net randal@visionequipmentnet JohnaLvisionequipmentnet • • Jodie Marbut Ron Shindoll Mike Neill Keisha Antoine, PhD, PE Weatherford Garland Amarillo Houston C: 817-229-0411 0: 214-9575066 C: 806-676-8975 0: 8323563903 jodie@visionequipment.net ron@visionequipmentmet Mike@Msionequipment.net Keisha@visionequipment.net vuww.visionequipment.net The Advantage of FlexRake° Adaptive I emnologyTM for Low Flow Applications �j Du peron o �'D,Upeosl"Oyf1°ADAPTIVE TECHNOCOGYT"' FlexRake® Low Flow Cost -Effective Screening for Low Flow Applications Unusually affordable, simple, front cleaning, front return bar screen technology. specifically designed for plants of 1 mgd or less average flow with channels 2 to 6 feet deep by 1 to 2 feet wide. Available with bar openings of 1/4 inch, 1/Z inch, 3/4 inch and 1 inch. • Pre -Engineered to be Energy Efficient to Save You Time and Money • Standard Features Include: Easy Controls, Spray Wash for Screenings, All Stainless Steel Construction • Tear -Drop Shaped Bars Provide Highest Efficiency in the Industry; 25%-50% More Efficient • Exclusive Thru-Barr"' Scrapers Clean 3 Sides of the Bar • Proven Duperon° FlexRake° Technology: No Lower Bearings, SprocketsJam Points or C ,onfined Space Entries The Duperon® FlexRake® Low Flow • UHMw Low Flow SmartLink7M— Completely Corrosion -Resistant Links Provide Long Life, Allows for "Dry" Operation • Integral Enclosure Provides Easy Installation Access and Viewing • No Carryover, No Scheduled Lubrication, No Maintenance Headloss vs. Downstream Level 10 9 347 GPM (0.5 MGD) ----- 8 1' Screen — — — — — i7 3140 Screen — — — — — 1120 Screen — — — — — 5 6 1/4' Screen M 5 o 658 GPM (0.95 MGD) — Ze 3 Z\ 1'Screen 2:: 3/40 Screen 112' Screen 1 1/4' Screen 0 _ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 IS 19 20 21 22 23 Downstream Level In Inches GENERAL Average Flow Capacity: Peak Flow Capacity: Channel Width: Maximum Liquid Level: Screen Area: Bar Opening: Range of Channel Depth: Minimum Water Depth: Discharge Height: Unit Height: Unit DAL Width: Lifting Capacity: Motor Size: UTILITY 1 Phase 3 Phase To Learn more about Duperon` Adaptive Technology;" scan this QR code or visit www.duperon.com 1 MGD 4 MGD 1 - 2 ft wide nominal 22" 3.5 ft (vertical projection) 1�421 1/21J, 3�4nr 111 2' to 6' 0" 32.5" as measured from deck max 65.5" measured from deck 41.5" measured at widest point 500 lb Y< hp, TEFC Standard (115 volt or 230 volt) (240 volt or 480 volt) Scraper spacing: 20.8" (every third link) Discharge Rate/Cleaning: Every 24.7 seconds Scraper Travel Speed: 50.5"/minute Sprocket Speed: 1.82 RPM MATERIALS OF CONSTRUCTION Drive Mechanics: 304 Stainless Steel Enclosure / Dead plate: 304 Stainless Steel Screen Bars: 316L Stainless Steel Chain / Scrapers: UHMW PE — UV Stable Motor: Steel with Std DC coatings CONTROL FUNCTIONALITY Emergency Stop • On -Off •Run Monitoring (Dry Contact) Explosion -proof controls available*** ***Custom site wiring is necessary with explosion -proof option. Main panel is remote mounted, explosion -proof motor and NEMA 7/9 push button station provided. Wiring completed per local requirements. �j�Duperon' ADAPTIVE TECHNOLOGY." Let's Build a System that Works for You`" 1200 Leon Scott Court � Saginaw, MI 48601 � P 989.754.8800 � F 989.754.2175 � TF 800.383.8479 � www.duperon.com Duperon' and FlexRake' are registered trademarks of Duperon Corporallon. SmarlLlnk" and Adaptive Technology"' area trademarks of Duperon Corporation. Let's Build a System that Works for Yous" is a service mark of Duperon Corporallon. 0 Copyright 2016, Duperon Corporallon 3007/3/16/OM WASHER COMPACTOR Positive Displacement, Dual -Auger System Self -Regulating Compaction Provides a Reliable, No -Hassle Way to Reduce Landfill Costs Robustly simple, high -efficiency, non -hatching process machine that cleans and compacts screenings up to 4 inches. Standard discharge lengths up to 20 feet. • Consistent Compaction Regardless of Debris Size or Volume (Using Proprietary Compaction Zone) • Positive Displacement: �— What Goes In, Comes Out • Up To 84% Volume Reduction, I Up To 60% Dry Solids _ ' Processes Non -Standard I l 'y� Wastewater Debris (Rocks, Clothing, Concrete, Metal) i up to 4 inches a Self -Centering Dual Augers Prevent Debris Wrapping _ Housing Geometry Controls ._ Potential for "Slip Flow" When Handling Grease, Septage and Similar Debris • Non -Clogging Flood Wash Port: Ideal For Non -Potable Water 'Patent Pending ���,,LRIp,�epSsfl"O,S11®ADAPTIVE TECHNOLOGYT�' OTHER WASHER COMPACTORS DUPERON® WASHER COMPACTOR CompactionFixed Reduction 1 Compaction Zone* Dependent on friction, debris volume and type Depends on mechanical device that controls compaction regardless of size & volume RESULT: inconsistent dry solids RESULT: consistent dry solids Single Screw DualAuger O A%% 0O Debris falls & if it can move along the flight, it is dragged forward Positive displacement (like meat grinder) counter rotation Prone to sticking & then rotating w/auger (not driving forward) Flights prevent wrapping and slipflow (The flight of one auger continuously interrupts the OR wrapping & overflowing hopper, churning, slipflow debris wrapping on the other auger) Two small augers = less HP, more energy efficient, stretches and stresses debris without chopping or grinding RESULT: overflowing or wrapped debris not driven forward RESULT: what goes in must go out BRUSHES STRAINER � No Brushes 6�m High maintenance & inconsistent performance Self-cleaning strainer as a result of maintained auger contact Expensive, potentially labor intensive, requires replacement of parts Non -clogging, durable & non -wearing BATCHING CONTINUOUS FLOW• i 2 3 Debris is stored in hopper during batch cycle Continuous screen operation Can have odor issues Immediate processing of debris for low odor Low HP = Low energy requirement AGITATION Large motor/gearbox & batch times Consistent high-pressure throughout system Complexity of controls Wash ports — flood vs. high maintenance fine spray nozzles Maintenance, energy, storage & possible overflow Wash ports located prior to compaction so debris is not forced into nozzle openings No Splashing WC BODY 1 • 3/a HP Motor typical • For bar screens up to 2' wide • Ideal for FlexRake® Low Flow units • Generally for flows less than 15MGD WC BODY 2 • 3/a,3,5HPmotors • For bar screens 2' to 6' wide • Flows up to 60 MGD • 3 and 5 HP conveyor -fed and Industrial applications DISCHARGE EXTENSION OPTION WC BODY 3 • 3/a, 3, 5 HP motors • For bar screens 5' to 10' wide • Flows up to 100 MGD • 3 and 5 HP conveyor -fed and Industrial applications s option is available for the Duperon® Washer Compactor and can nsport debris up to 40 feet in any direction, eliminating the need for ional motorized conveyance systems. With debris being compressed �r to the discharge chute, extended transport distance and elevation achieved with little or no resistance and is unaffected by extended :ention times. It contains no moving parts to fail and can operate ltinually if required. te: Screenings compaction is achieved without the use of a compaction using in this configuration. WATER • Utilizes filtered effluent or municipal water • Washer consumes 3-10 gallons per minute • Requires 40 PSI-60 PSI • Drain connection 3" NPT • Supply connection 1/2" NPT UTILITY • 120/240 volt, single phase • 240/480 volt, three phase (0.6 kW/2.3 kW/3.8kW) DRIVE 3/4 HP, 3 HP, 5 HP inverter duty motors available MATERIALS OF CONSTRUCTION • 304 SSTL or 316 SSTL • SSTL spur gears (17 - 4 PH) • Self-lubricating main auger bearings TYPICAL PERFORMANCE • 30% - 60% dry solids • 60% - 70%weight reduction • Significantly decreases odor and fecal content CAPACITY Available from: 30 ft3/hour to 150 ft3/hour MAINTENANCE Five years: Recommended gearbox service y rL,��.�s �'Ji I _ __ �.) BAGGER: The Bagger System attaches to the discharge chute for applications where bag dispensing and odor control are required. Included is a 100 meter length of continuous feed bags. SPECIFICATIONS: LATCH AND HOLDER: 304 SS or 316 SSTL BAG: 1.3 mil Polyethylene BAG SIZE: 22" Diameter x 295 ft. length DROP SLEEVE: This flexible Drop Sleeve is an economical way to direct and contain downward debris discharge. Also used where waste container hauling may cause damage to metal discharge chutes. SPECIFICATIONS: LATCH AND HOLDER: 304 SS/316 SSTL SLEEVE: Heavy Duty Urethane Canvas ACCESS CHUTE: In applications that involve periodic inspection of discharging solids, the Access Chute with inspection panel is available in modular segments, installed as needed in the discharge chute system, SPECIFICATIONS: CHUTE: 14 ga. 304/316 SSTL FLANGES: 1/4" DRAW TYPE LATCHES:Hinged and Latched or Latched Both Sides CASTER ASSEMBLY: Optional casters allow for flexible placement of the Washer Compactor and simple movement of the unit. SPECIFICATIONS: CASTERS: Urethane Wheels, 304/316 SSTL FRAME: 2x2x1/4 Tubular, 304/316 LOCKING CASTERS EXPLOSION PROOF ELEC. DISCONNECT HEAT BLANKET: The Compaction Zone and discharge chute can be thermally protected from cold temperatures with the addition of the Heat Blanket with integral heat trace. SPECIFICATIONS: EXPLOSION PROOF HEAT TRACE SYSTEM (All connections NEMA 7/9) 10 W/FT = 600 w max,,12OV HARD CONTACT THERMOSTAT (NEMA 7/9) INSULATED BLANKET: All Weather Teflon ;;�,:�.. O'. �: __ _ ;Q _ �. �� .� ;t ��-` - ��' —r�:..' �D,tap,oeossf'AOf15 ADAPTIVE TECHNOLOGYT"' 1200 Leon Scott Court � Saginaw, MI 48601 � P 989.754.8800 � F 989.754.2175 � TF 800.383.8479 � www.duperon.com Patent Pending. Duperon' Is a regls[ered trademark of Duperon Corporation. Atlaptive Technology'" is a trademark of Duperon Corporation. ®Copyright 2015, Duperon Corporation 2032/1/17/Ott 053 Duperon` ADAPTIVE TECHNOLOGY The Right People, The Right Process, The Right Choice. April 7, 2019 Attn: Troy Hopkins City of Anna 3223 N. Powell Parkway Anna, TX 75409 Mr. Hopkins, Thank you for considering Duperon Corporation for your Project. Please accept this letter as confirmation; Duperon Corporation is the sole sourced manufacturer for the FlexRake©, Full Penetration Fine Screen, Low Flow and IQ Series Screens as well as the industries only Dual -Auger Washer Compactor. These systems are manufactured by Duperon Corporation and are not made under license or any other arrangement. Additionally Vision Equipment is our only authorized representative for the Texas and Oklahoma Territory, 1) Maintenance is 100% accomplished from the operating deck level eliminating the need for confined space entry. 2) Duperon® use's premium efficiency Sumitomo Cyclo gear motors eliminates abrasive sliding contact. Unique rolling contact, low operating speeds and the grease -filled non vented gearbox allow for ten-year maintenance schedules on the gearbox. 3) Duperon Washer Compactors are Patented Technology and are the only Dual Auger Positive Displacement Washer Compactors in the Industry. 4) Dual Auger Washer Compactor features positive displacement augers to eliminate debris wrapping and maintenance associated with other technologies. This is coupled to an active compaction zone to ensure all debris are processed, washed and consistently dewatered before being discharged into the debris bin. We look forward to fulfilling your treatment needs for this project. If you have any questions or need further information, please don't hesitate to contact Duperon. Tha nl< you, Marl< Hickok Regional Manager Duperon Corporation Cc: John Belton, Vision Equipment 1200 Leon Scott Court � Saginaw, MI 48601 � P 989.754.8800 � F 989.754.2175 � TF 800.383.8479 � www.duperon.com HIOWARD CONS I MUCTIONI TNCy P.O. Box 1685, Ardmore, OK 73402 402 I Street NW, Ardmore, OK 73401 (580) 226-4700 Fax (580� 798-5077 April 19, 2021 City of Anna 3223 N. Powell Parkway Anna, TX 75409 Attn: Chip Hopkins RE: City of Anna WWTP Installation of new Duperon F1exRake Bar Screen Dear Mr. Hopkins, HCI was contacted by John Belton with Vision Equipment to provide a proposal for installation of a new Duperon FlexRake Bar Screen at the City of Anna WWTP located in Anna, Texas. Our proposal is based upon Duperon Proposal Number 10148 R5 dated March 15, 2021 and pictures of the existing Anna WWTP bar screen provided by Vision Equipment. HCI and Vision Equipment recently worked together on installation of a new bar screen at the Bridgeport, Texas WWTP. City of Anna will direct purchase the new bar screen. HCI will provide personnel and equipment required for removal of the existing screen and installation of the new screen. This will include electrical services to install the new screen control panel and service to the new screen, anchors as required and startup assistance. HCI includes General Liability and Workers Compensation Insurance. SINGLE SCREEN OPTION • Provide personnel to assist City of Anna in review of submittals and verification of Duperon requirements. • Removal of existing bar screen. • Install Duperon F1exRake Bar Screen. • Install Control Panel and Electrical service to bar screen. • Assist Duperon in startup of new screen. PRICE: Twenty Five Thousand Eight Hundred Dollars ($25,800.00) T w U SCREEN OPTION Based on Duperon Proposal # 10148 R3. SCOPE: • Provide persorulel to assist City of Anna in review of submittals and verification of Duperon requirements. • Removal of existing screen. • Install two (2) each Duperon F1exRake Bar Screens. • Install Control Panel and Electrical Service to bar screen. • Assist Duperon with startup of new screens. PRICE: Forty Tluee Thousand Eight Hundred Dollars ($43,800.00) EXCLC7SIONS: • Modifications to lift station of any kind • By Pass pumping. • Sales Tax • Performance and Payment Bond Please contact me with any questions Thanks for the opportunity! Michael Howard HNImLt=Y �aration ancJ procQ�S Proposal Reference to Project Scope #21-0722-01 July 22, 2021 City of Anna Texas 1400 Roadrunner Rd. Anna, TX 75409 1- ALRICK Belt Press Restoration July 22, 2021 David Trevino City of Anna Anna, TX RE: Proposal for Restoration for 1 (one) —ALRICK Belt Press Dear Mr. Trevino, Thank you for your interest in the services of Langley Separation and Process LLC., we are pleased to provide you with the followi�ig proposal. Langley Separation and Process LLC proposal is for the parts and labor on {one) ALRICK Belt Press. The OEM parts are for the zeplacement, 'involving the following: Section 1: Items I parts listed below will be replaced: • 1- 4-BV Bleeder Valve • 1- Speedaire Air Line Filter • 1- ContzolAir Type 400 BXK Air Pressure Regulator • 38- VPE 231 Pillow Blocic • 14- VPE 224 Pillow Blocic • 4- VTWE 231 Talce Up Unit • 4- VF2S231 Browning Bearing • 4- VF4S3S6 4 Bait Flange • 1-Boston Motor A-C Motor 1 HP 17000RPM • 1-Boston Motor A-C Motor 1 1/2 HP 17000RPM • 1-Boston Reducers F730-60S-B7-G • 1-Boston Reducers F732060S-B7-G • 2- Spz•ocicet 60B60 X 1 15/ 16 Keyway and set sczews • 2- Sprocket 60B 12 X 1 '/ • 2- Sprocket 60BS34 X 1 I S/16 • 2- Sprocket b013 X 1 3/8 • 2- Spur Gears TC896 X 1 15/16 • 4- Tension 3 X 8 SB 3.0 SPUS 16 8 STRIC SP CYL • 2- Tracking 2.5 X 4 16 6 • 2-Bellows "B5C" Air Control Valves V - 360FP • 60- 1 1/2' Flat Fan Nozzles W/gasket only • I- 6' x 7' 700 Miczon Scz•een • 2- UHMW Polyethylene 1/4" TH x 4" W x 42" L • 1-Right Angle Syncrogear • 3- Chains Section 2 Suzzz?ested Line items Pai is (not included in price) X - Replacement Stator• for Netsch Cavity Punap = $1, X 83.00 2- 40"x 56'3"Replacement Press Belts 14;/10 Clip Per Inch Urethane = $2, 002.56 1- Booster Pump = $2,538.95 1- Polymer pump = $9,193. 00 Section 3: Exclusions: Taxes arad fees Freight (costplus 20%) Discovery items ... related to parts (cost plus 20%) Section 4: Price Parts, labor and expenses for restoz•ation as described in Section 1 Total $33,422.50 Payment Terms for Parts: GO%placement of order 40% upon completion Langley Separation and Process estimates a tune of 7 days. Since there are unforeseen circumstances and unknown conditions until time of work is perform the estimated time frame is subject to change. The following is some of those vaz•iables: 1. Additional parts required after removal of old paz-ts 2. Shipping delays for receivables Langley Separation and Process LLC, reserves the right to provide change orders for any additional services, parts, and labor required thru the entire retrofitting of the press and or if the client request additional services and labor not listed within the proposal. The client is responsible for providing the following: 1. Electrical (110 volt) for operation of hand tools and air compressors 2. Loading and off-loading of parts 3. Disposal of old parts Does not include any automatic lubrication parts if applicable. Plus, all services ace based upon disassemble and reassembly completed at site. Langley Separation and Process LLC has available numerous mobile belt press and all apparatuses for rental to continue dewatering during the duration of the refurbishing. The temporary belt presses are dependent on timing, location and space availability at the project site a separate proposal can be provided. Langley Separation and Process LLC. would like to thank you for the opportunity in submitting a proposal for the restoration of your (one) ALRicic Belt Press If you have any questions or need clarifications, please do not hesitate to call. Sincerely, Tony Langley President Langley Separation and Process LLC Main contacts for this project: Tony Langley President 817-26M388 tones ig eyseparation.com Cheryl Henderson Project coordinator 51M62-9917 cher• ly alan lg eyseparation.com LANGLEY Standard Terms of Sale separation and process 1. Applicable Terms. These terms govern the purchase and sale of the equipment and related services, if any (collectively, "Equipment"), referred to in Seller's purchase order, quotation, proposal or acknowledgment, as the case may be ("Seller's Documentation"). Whether these terms are Included in an offer or an acceptance by Seller, such offer or acceptance is conditioned on Buyer's assent to these terms. Seller rejects all additional or different terms in any of Buyer's forms or documents. 2. Payment. Buyer shall pay Seller the full purchase price asset fortis in Seller's Documentation. Unless Seller's Documentation provides otherwise, freight, storage, Insurance and all taxes, duties or other governmental charges relating to the Equipment shall be paid by Buyer. If Seller is required to pay any such charges, Buyer shall Immediately reimburse Seller. All payments are due within 30 days after receipt of Invoice. Buyer shall be charged the lower of i Y% Interest per month or the maximum legal rate on all amounts not received by the due date and shall pay all of Seller's reasonable costs (including attorneys' fees) of collecting amounts due but unpaid. All orders are subject to credit approval. 3. Delivery. Delivery of the Equipment shall be In material compliance with the schedule in Seller's Documentation. Unless Seller's Documentation provides otherwise, Delivery terms are F.O.B. Seller's facility. 4.Ownershlp of Materials. All devices, designs (including drawings, plans and specifications), estimates, prices, notes, electronic data and other documents or Information prepared or disclosed by Seller, and all related intellectual property rights, shall rernain Seller's property. Seller grants Buyer a non-exclusive, non- transferable license to use any such material solely for Buyer's use of the Equipment. Buyer shall not disclose any such material to third parties without Seller's prior written consent. 5. Changes. Seller shall not implement any changes in the scope of work described in Seller's Documentation unless Buyer and Seller agree In writing to the details of the change and any resulting price, schedule or other contractual modifications. This Includes any changes necessitated by a change in applicable law occurring after the effective date of any contract including these terms. 6. Warranty. Subject to the following sentence, Seller warrants to Buyer that the Equipment shall materially conform to the description in Seller's Documentation and shall be free from defects in material and workmanship. The foregoing warranty shall not apply to any Equipment that is specified or otherwise demanded by Buyer and is not manufactured or selected by Seller, as to which (i) Seller hereby assigns to Buyer, to the extent assignable, any warranties made to Seller and (il) Seller shall have no other liability to Buyer under warranty, tort or any other legal theory. If Buyer gives Seller prompt written notice of breach of this warranty within 18 months from delivery or 1 year from acceptance, whichever occurs first (the "Warranty Period"), Seller shall, at Its sole option and as Buyer's sole remedy, repair or replace the subject parts or refund the purchase price therefor. If Seller determines that any claimed breach is not, in fact, covered by this warranty, Buyer shall pay Seller Its then customary charges for any repair or replacement made by Seller. Seller's warranty Is conditioned on Buyer's (a) operating and maintaining the Equipment in accordance with Seller's instructions, (b) not making any unauthorized repairs or alterations, and (c) not being in default of any payment obligation to Seller. Seller's warranty does not cover damage caused by chemical action or abrasive material, misuse or Improper installation (unless installed by Seller). THE WARRANTIES SET FORTH IN THIS SECTION ARE SELLER'S SOLE AND EXCLUSIVE WARRANTIES AND ARE SUBJECT TO SECTION 30 BELOW, SELLER MAKES NO OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE, 7. Indemnity. Seller shall indemnify, defend and hold Buyer harmless from any claim, cause of action or liability incurred by Buyer as a result of third party claims for personal Injury, death or damage to tangible property, to the extent caused by Seller's negligence. Seller shall have the sole authority to direct the defense of and settle any Indemnified clairn. Seller's Indemnification Is conditioned on Buyer (a) promptly, within the Warranty Period, notifying Seller of any claim, and (b) providing reasonable cooperation in the defense of any claim. 8. Force Majeure, Neither Seller nor Buyer shall have any liability for any breach (except for breach of payment obligations) caused by extreme weather or other act of God, strike or other labor shortage or disturbance, fire, accident, war or civil disturbance, delay of carriers, failure of normal sources of supply, act of government or any other cause beyond such party's reasonable control. 9. Cancellation. If Buyer cancels or suspends its order for any reason other than Seller's breach, Buyer shall promptly pay Seller for work performed prior to cancellation or suspension and any other direct costs incurred by Seller as a result of such cancellation or suspension. 10. LIMITATION OF LIABILITY, NOTWITHSTANDING ANYTHING ELSE TO THE CONTRARY, SELLER SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, PUNITIVE OR OTHER INDIRECT DAMAGES, AND SELLER'S TOTAL LIABILITY ARISING AT ANY TIME FROM THE SALE OR USE OF THE EQUIPMENT SHALL NOT EXCEED THE PURCHASE PRICE PAID FOR THE EQUIPMENT. THESE LIMITATIONS APPLY WHETHER THE LIABILITY IS BASED ON CONTRACT, TORT, STRICT LIABILITY OR ANY OTHER THEORY. il. Miscellaneous. If these terms are Issued in connection with a government contract, they shall be deemed to Include those federal acquisition regulations that are required by law to be Included. These terms, together with any quotation, purchase order or acknowledgement Issued or signed by the Seller, comprise the complete and exclusive statement of the agreement between the parties (the "Agreement")and supersede any terms contained in Buyer s documents, unless separately signed by Seller. No part of the Agreement may be changed or cancelled except by a written document signed by Seller and Buyer. No course of dealing or performance, usage of trade or failure to enforce any term shall be used to modify the Agreement. If any of these terms is unenforceable, such term shall be limited only to the extent necessary to make it enforceable, and all other terms shall remain In full force and effect. Buyer may not assign or permit any other transfer of the Agreement without Seller's prior written consent. The Agreement shall be governed by the laws of the Commonwealth of Pennsylvania without regard to Its conflict of laws provisions. 12. Export Compliance. Buyer acknowledges that seller is required to comply with applicable export laws and regulations relating to the sale, exportation, transfer, assignment, disposal and usage of the Equipment and Services provided under the Contract, including any export license requirements. Buyer agrees that such Equipment and Services shall not at any time directly or indirectly be used, exported, sold, transferred, assigned or otherwise disposed of in a manner which will result in non-compliance with such applicable export laws and regulations. It shall be a condition of the continuing performance by seller of its obligations hereunder that compliance with such export laws and regulations be maintained at all time. BUYER AGREES TO INDEMNIFY AND HOLD SELLER HARMLESS FROM ANY AND ALL COSTS, LIABILITIES, PENALTIES, SANCTIONS AND FINES RELATED TO NON-COMPLIANCE WITH APPLICABLE EXPORT LAWS AND REGULATIONS. RNULEY s ?ParaTIO and process 7-21-2021 David Trevino Sr. Operations City of Anna 1400 Roadrunner Road Anna, Texas 75409 Phone: 214-585-8681 Email: dtrevino@annalexas.gov Sub)ect: 1.0 Meter ALRICK Belt Filter Press Dear Mr. Trevino This letter Is to inform you that Langiey Separation and Process LLC is the soul source provider for the ALRICK Belt Filter Press Company following items and/or services. The above- mentioned company is the Soul Source of the items and services listed above, and no other company sells or distributes such items and services is a precluded by the existence of a patent, copyright, secret process or monopoly. The ALRICI< Press Company located in Johnstown, New York is no longer in existence but, during their years manufacturing the ALRICK Belt Filter Press, Langiey Separation and Process LLC distributed new equipment, used equipment, rebuilds, parts and services throughout the United States. At this time, there is no other• company offering rebuild, parts and service for this product. Please feel free to visit our website at www.lan�leyseparation.com. Sincere Tony LE 1405 Pecan Circle, Canyon Lake, Texas 78133 512-662-9917 www.langleyseparation.com